Contact Us
TEL: +86-511-85722368
Mob: +86-15805290338
E-mail: tyb@cn-meihua.com
Address: Pan Zonglu, Ding MAO Development Zone, Zhenjiang City, Jiangsu Province
Cadmium Telluride Film Production Line

Cadmium Telluride Film Production Line

The assembly line of the solar panel package is mainly used for the packaging and production of cadmium telluride thin film solar cells. The main production processes include insulation tape laying, electrode lead line laying, positive and negative electrode laying, edge sealing tape laying, EVA...

1.jpg

 The assembly line of the solar panel package is mainly used for the packaging and production of cadmium telluride thin film solar cells. The main production processes include insulation tape laying, electrode lead line laying, positive and negative electrode laying, edge sealing tape laying, EVA cutting and laying, and backplane glass laying.


Material allocation:(Can be configured according to customer requirements)

1)PLC controller selection series(Have extended net function).

2)The touch screen uses the Taiwan delta brand.

3)Use of Japanese SMC brand for pneumatic components.

4)Selection of Kean brand for photoelectric sensor.

5)The servo motor selects the Panasonic brand, the stepper motor selects Japanese SANYO.

6)Low voltage switch、Contactor、Butto etc electronic components choose Schneider equivalent brand. 

7)Bearing select the famous brand, such as SKF、NSK、FAG etc.


Technical parameter:

1、Size of battery substrate:600mm×1200mm,tolerance:±1mm;thickness:3.2mm;four sides edge:15mm;

2、Backboard glass size:600mm×1200mm,tolerance:±1mm;thickness:3.2mm;?30mm through-hole, Position distance two edge (Short side direction 250mm, Long side direction 130mm).

3、Line work:≤60s/pcs;

4、Production line overall size:≤L 11m×W 6m×H 1.8m; Transmission height:0.9m;Total quality of production line:10 ton.

5、Equipment power source:Compressed air pressure≥0.6MPa,flow:6m3/h,Vacuum pressure≤70KPa,Single-phase power supply voltage AC220V,power 10KW.

6、Principle of substrate positioning in production line: Upper left corner of substrate transmission.

7、Sound and light alarm is not needed, and no operation / wrong operation is done. There is a communication interface reserved on the battery substrate / backplane glass feed end and the chip outlet end, so as to realize the transmission of the front and rear automatic pipelines.

8、Device body color:Germany RAL Standard  RAL 7047

9、Overall noise control of equipment(especially the vacuum source):<70db

10、The drive speed of the battery board in this device:≤300mm/s


Hot Tags: cadmium telluride film production line, China, manufacturers, suppliers, factory, buy, made in China
Inquiry