Contact Us
TEL: +86-511-85722368
Mob: +86-15805290338
E-mail: tyb@cn-meihua.com
Address: Pan Zonglu, Ding MAO Development Zone, Zhenjiang City, Jiangsu Province

Pneumatic Energy-storing Spot Welder

PM113K/ P115/ PM115K/ P320/ PM118K/ P1108-1/ PM1020Q/ PM1030Q PM1010Q type energy storage spot welder is a new type of welding machine with welding head, welding controller and welding transformer. PM1010Q/ PM1012Q / PM1040Q type energy storage spot welders are a new type of welding equipment...

PM113K/ P115/ PM115K/ P320/ PM118K/ P1108-1/ PM1020Q/ PM1030Q

PM1010Q type energy storage spot welder is a new type of welding machine with welding head, welding controller and welding transformer.

PM1010Q/ PM1012Q / PM1040Q type energy storage spot welders are a new type of welding equipment which adopts MPU control, silicon controlled discharge and pneumatic compression.


These types energy storage spot welder is a new type of welding equipment using MPU control and silicon controlled discharge. The device adopts the capacitive energy storage and the principle of releasing large current in a moment to weld the workpiece. The equipment has short welding time and concentrated energy. It can weld non-ferrous metal and black metal well, and the workpiece is not easy to oxidize.


These types energy storage spot welding machine to change the traditional AC contactor discharge mode, thyristor controlled discharge, reduce noise, prolong life, safe and reliable. The whole welding procedure is controlled by computer chip, and the control is accurate and reliable.


These types energy storage spot welding machine can be widely used in electronics, electric vacuum, electrical, hardware, semiconductor, battery etc.. It can be used not only for spot welding, but also for replacement of electrodes and moulds and for various packaging and welding.


PM113K Energy-storing spot welder

1.jpg

Main technical parameters

1. the maximum storage capacity: 300J

2. storage: the highest voltage 380V

3. the output voltage of the transformer = 5.5V

4. welding ability brass stainless steel: 0.8+0.8mm: 0.6+0.6mm

5. power supply: 380V 50HZ 2 phase + zero line

6. program control: MPU chip control

7. weight: about 90Kg

8. dimensions: L * B * H 900 x 600 x 1000 (mm)


P115 energy-storing spot welder

Main technical parameters

1. the maximum storage capacity: 500J

2. storage capacitors: 5500uf

3. The charging voltage range: 80 ~ 380V

4. welding ability brass stainless steel: 1+1mm: 0.7+0.7mm

5. power supply: 380V 50HZ 2 phase + zero line

6. welding pressure adjustment range: 40~245N

7. weight: about 130Kg

8. dimensions: L * B * H about 1000 x 700 x 1120 ~ (mm)


1.jpg

PM115K energy-storing spot welder

Main technical parameters:

1. the maximum storage capacity: 500J

2. storage: the highest voltage 380V

3. the output voltage of the transformer = 5.5V

4. welding ability brass stainless steel: 1.0+1.0mm: 0.8+0.8mm

5. power supply: 380V 50HZ 2 phase + zero line

6. program control: MPU chip control

7. weight: about 130Kg

8. dimensions: L * B * H 900 x 600 x 100 (mm)


P320 energy-storing spot welder

Main technical parameters

1. the maximum storage capacity: 320J

2. storage capacitors: 4700uf

3. charging voltage range: 80 ~ 380V

4. welding ability brass stainless steel: 0.8+0.8mm: 0.5+0.5mm

5. power supply: 380V 50HZ 2 phase + zero line

6. welding pressure adjustment range: 40~245N

7. weight: about 130Kg

8. dimensions: L * B * H about 1000 x 700 x 1120 ~ (mm)


PM118K energy-storing spot welder

Main technical parameters:

1. the maximum storage capacity: 800J

2. storage: the highest voltage 380V

3. the output voltage of the transformer = 5.5V

4. welding ability brass stainless steel: 1.5mm+1.5mm: 1.0mm+1.0mm

5. power supply: 380V 50HZ 2

6. program control: MPU chip control

7. weight: about 120Kg

8. dimensions: L * B * H 840 x 560 x 1160 (mm)


1.jpg

P1108-1 energy-storing spot welder

Main technical parameters

1, maximum storage capacity: 800J

2, energy maximum voltage: 380V

3, transformer output voltage: less than 5.5V

4, welding capacity: 1.2+1.2mm stainless steel, brass, 0.8+0.8mm

5, power supply: 2 50HZ, 380V+ phase, zero line

6, program control mode: MPU chip control

7, size: L * B * H 900 x 650 x 1300 (mm)

8, weight: about 140KG


2.jpg

PM1020Q energy-storing spot welder

Technical parameters:

1. the maximum storage capacity: 2000J

2. storage: the highest voltage 380V

3. the output voltage of the transformer = 6.0V

4. welding ability brass stainless steel: 1.5mm+1.5mm: 1.2mm+1.2mm

5. power supply: 380V 50HZ 2

6. gas supply: = 0.5MPa

7. program control: MPU chip control

8. weight: about 150Kg

9. dimensions: L * B * H 850 x 650 x 1320 (mm)


PM1030Q energy-storing spot welder

technical parameter

1. the maximum storage capacity: 3000J

2. storage: the highest voltage 380V

3. the output voltage of the transformer = 8.0V

4. welding ability brass stainless steel: 1.8+1.8mm: 1.5+1.5mm

5. power supply: 380V 50HZ 2 phase + zero line

6. gas supply: = 0.5MPa

7. program control: MPU chip control

8. weight: about 250Kg

9. dimensions: L * B * H 780 x 1160 x 1770 (mm)


PM1010Q

Technical parameters:

1. the maximum storage capacity: 1000J

2. storage: the highest voltage 380V

3. welding ability brass stainless steel: 0.5mm+0.5mm: 0.3mm+0.3mm

4. power supply: 380V 50HZ 2 phase + zero line

5. gas supply: = 0.5MPa

6. program control: MPU chip control

7. weight: about 200Kg


PM1012Q

Technical parameters:

1. the maximum storage capacity: 1200J

2. storage: the highest voltage 380V

3. the output voltage of the transformer = 6.0V

4. welding ability brass stainless steel: 1.2mm+1.2mm: 1.0mm+1.0mm

5. power supply: 380V 50HZ 2

6. gas supply: = 0.5MPa

7. program control: MPU chip control

8. weight: about 140Kg

9. dimensions: L * B * H 900 x 650 x 1300 (mm)


PM1040Q

technical parameter

1. the maximum storage capacity: 5000J

2. storage: the highest voltage 380V

3. the output voltage of the transformer = 6.0V

4. welding ability brass stainless steel: 2.0mm+2.0mm  brass: 1.8m+1.8mm hard aluminum : 1.50mm+1.5 mm

5. power supply: 380V 50HZ 2 phase + zero line

6. gas supply: = 0.5MPa

7. program control: MPU chip control

8. weight: about 400Kg

9. dimensions: L * B * H 1150 x 780 x 1650 (mm)


PM118K-2Q double-headed energy-storing spot welder

1.jpg


 The double energy storage spot welding equipment has changed the traditional welding methods, the control, capacitor thyristor, discharge, instant release of three big current on the workpiece welding, the device can be used for single point welding, and can be used for three point and two point welding is the preferred equipment cover and copper welding capacitor industry. 




technical parameter

The storage capacity 800J

The input voltage 2 phase 50HZ 380V+ zero line

Welding ability (stainless steel) 1.2+1.2mm

Electrode stroke 10mm

The electrode arm spacing 90 ~ 100mm

Arm extension 95mm

The electrode pressure 160 ~ 500N

The weight of 100Kg


Hot Tags: pneumatic energy-storing spot welder, China, manufacturers, suppliers, factory, buy, made in China
Inquiry